Allied’s Mechanical Pulverizer (AMP) offers elevated performance for demolition and recycling applications
Pulverizing concrete in a mobile situation is a current technique to separate reinforced concrete from the rebar. Allied’s AMP mechanical pulverizer is designed for controlled demolition of concrete slabs, walls, foundations and bridge decks. The AMP has no hydraulic system of its own. It takes advantage of the full-force of the bucket cylinder on the excavator which is more economical than a built-in cylinder.
The AMP Series mechanical pulverizers feature:
• Pin-on jaw design that permits easy transfer between excavators
• No additional hydraulics required saves installation expenses
• Made of high strength, abrasion-resistant steel for long-life
• Fitted with replaceable, wear-resistant steel teeth for economical maintenance
The AMP mechanical pulverizer is available in three sizes (AMP 50, AMP 70 and AMP 90). They are intended for use on excavators weighing from 44,000 lbs. to 110,000 lbs. The model numbers represent the median weight of the excavators (50,000, 70,000 or 90,000) that the AMP is designed to fit. The excavator must have adequate lift capacity to properly and safely operate the AMP.
Engineered for exceptional fragmentation, the AMP is an ideal demolition tool for separating and cleaning rebar from concrete.
|
SPECIFICATIONS |
|
AMP 50 |
AMP 70 |
AMP 90 |
|
Operating Weight |
lbs (kg) |
3,890 (1,765) |
4,740 (2,150) |
6,990 (3,170) |
|
Full Opening |
inch (mm) |
42 (1,070) |
46 (1,180) |
59 (1,490) |
|
Moveable (Upper) Jaw
Width |
inch (mm) |
14 (350) |
16 (400) |
19 (490) |
|
Fixed (Lower) Jaw Width |
inch (mm) |
20 (510) |
27 (690) |
31 (790) |
|
Cutter Length |
inch (mm) |
6.5 (164) |
7.1 (180) |
7.9 (200) |
|
Crushing Force |
1000 lbs (kN) |
78 (347) |
84 (374) |
126 (560) |
|
Cutting Force |
1000 lbs (kN) |
220 (979) |
242 (1,076) |
286 (1,272) |
|
Recommended
Carrier Weight |
1000 lbs
(1000 kg) |
44 - 66
(20 - 30) |
66 - 84
(30 - 38) |
84 - 110
(38 - 50) |
